Description: | Micro valve |
Part-#: | 19520 |
Type: | SMLD 300G H J0.3 T2 M F |
Dimension [mm]: | Ø 4 x 33 |
Basic type: | smld300g |
Sealing principle: | hard sealing |
Fixation: | Ø 3.5 |
Outlet: | Jet |
Nozzle-ø [mm]: | 0.3 |
Valve travel [mm]: | 0.06 (T2) |
Inlet: | Manifold Ø 2.7 |
Filter: | 40 µm |
Availability: |
max. Pressure [bar]: | 65 |
min. dispensing volume [nl]:
(water 0.2 bar opening time 400 µs) | 100 |
max. Flow rate [ml/min.]:
(water, 1 bar) | 42 |
Inner volume [µl]: | 65 |
Repeat accuracy: | < 5 % CV |
max. Temperature permanent: | 100°C |
max. Temperature shortly: | 125°C |
Materials in contact with medium: | Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby |
Dispensable media: | Gases and liquids |
Typical response time: [μs] : | 300 – 450 |
Coil resistance [Ohm]: | 6 |
max. dispensing frequency: | up to 4000 Hz |
Coil inductance [mH]:
(valve coil mounted on micro valve) | 0.8 |
Valve basic type
Fixation
Outlet
Nozzle diameter
Valve travel
Valve filter
Valve inlet
Velve coil
With a minimum grid width of 6 mm, the SMLD 300G is very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl.
The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size.
Grid width with highest resolution, small size. Suitable to our adapter nozzles.
The coil unit must be ordered separately!