Micro valve 20414


Description:	Micro valve
Part-#:	20414
Type:	SMLD 300G H F1/4-28 J0.3 T2 M F M6x0.75
Dimension [mm]:	Ø 7.8 x 44
Basic type:	smld300g
Sealing principle:	hard sealing
Fixation:	M 6 x 0.75
Outlet:	1/4-28 UNF flat
Nozzle-ø [mm]:	0.3
Valve travel [mm]:	0.06 (T2)
Inlet:	Manifold Ø 2.7
Filter:	40 µm
Availability:	on demand

Fluidix Data


max. Pressure [bar]:	65
min. dispensing volume [nl]: (water 0.2 bar opening time 400 µs)	100
max. Flow rate [ml/min.]: (water, 1 bar)	42
Inner volume [µl]:	65

Additional data


Repeat accuracy:	< 5 % CV
max. Temperature permanent:	100°C
max. Temperature shortly:	125°C
Materials in contact with medium:	Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby
Dispensable media:	Gases and liquids

Electrical data


Typical response time: [μs] :	300 – 450
Coil resistance [Ohm]:	6
max. dispensing frequency:	up to 4000 Hz
Coil inductance [mH]: (valve coil mounted on micro valve)	0.8

SMLD 300G, the ?exible one

With a minimum grid width of 6 mm, the SMLD 300G is very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl.

Valve coils

The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size.

Valve installation

The thread fastening is designed to allow an easy exchange of the micro valves. especially suited when the micro valves should be as easy to exchange as possible. The micro valve can be exchanged quickly and without dismantling the entire valve holder and without disconnecting the electric connections.

Ideally, this fastening type can be combined with our valve holders. Our valve holder concept covers the needs of a wide variety of applications and will convince you with its easy handling.

The coil unit must be ordered separately!

Product Selector

back