Micro valve 24712


Description:	Micro valve
Part-#:	24712
Type:	SMLD 300GR H J0.2 T3 M
Dimension [mm]:	Ø 4 x 33
Basic type:	smld300gr
Sealing principle:	hard sealing
Fixation:	Ø 3.5
Outlet:	Jet
Nozzle-ø [mm]:	0.2
Valve travel [mm]:	0.1 (T3)
Inlet:	Manifold Ø 2.7
Filter:	without
Availability:

Fluidix Data


max. Pressure [bar]:	50
min. dispensing volume [nl]: (water 0.2 bar opening time 400 µs)	65
max. Flow rate [ml/min.]: (water, 1 bar)	18
Inner volume [µl]:	65

Additional data


Repeat accuracy:	< 5 % CV
max. Temperature permanent:	100°C
max. Temperature shortly:	125°C
Materials in contact with medium:	Stainless steels: 1.4404, 1.4435, 1.4401, 2.4819 / PEEK, sapphire, ruby
Dispensable media:	Gases and liquids

Electrical data


Typical response time: [μs] :	300 – 450
Coil resistance [Ohm]:	6
max. dispensing frequency:	up to 4000 Hz
Coil inductance [mH]: (valve coil mounted on micro valve)	0.8

SMLD 300GR the most resistant

This valve type offers crucial benefits in regards of corrosion and the handling of aggressive medias, compared to SMLD 300G, but remains fully compatible in size and function for all SMLD products and components.
Just like the SMLD 300G microvalves, this valve type has a minimum grid width of 6 mm, thus its very space-saving, while offering maximum flexibility. These micro valves are suitable for a wide range of viscosities and are available in many configurations. Valve holder with integrated heating can also be combined with it. The internal volume is 65 µl.

Valve coils

The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size.

Valve installation

Grid width with highest resolution, small size. Suitable to our adapter nozzles.

The coil unit must be ordered separately!

Product Selector

back