Micro valve 19590


Description:	Micro valve
Part-#:	19590
Type:	SMLD 300 H J0.1 T1 S
Dimension [mm]:	Ø 3.5 x 32.7
Basic type:	smld300
Sealing principle:	hard sealing
Fixation:	Ø 3.5
Outlet:	Jet
Nozzle-ø [mm]:	0.1
Valve travel [mm]:	0.03 (T1)
Inlet:	Barbed tube connector Ø 1.25
Filter:	–
Availability:	on demand

Fluidix Data


max. Pressure [bar]:	40
min. dispensing volume [nl]: (water 0.2 bar opening time 400 µs)	15
max. Flow rate [ml/min.]: (water, 1 bar)	4
Inner volume [µl]:	25

Additional data


Repeat accuracy:	< 5 % CV
max. Temperature permanent:	100°C
max. Temperature shortly:	125°C
Materials in contact with medium:	Stainless steels: 1.4404, 1.4301, 1.4310, 1.4105 IL / PEEK, sapphire, ruby
Dispensable media:	Gases and liquids

Electrical data


Typical response time: [μs] :	300 – 450
Coil resistance [Ohm]:	6
max. dispensing frequency:	up to 4000 Hz
Coil inductance [mH]: (valve coil mounted on micro valve)	0.8

SMLD 300, the smallest

With a minimum grid width of just 4.5 mm (with a special coil package even only 4 mm), the micro valves SMLD 300 are suitable for the tightest of spaces. Low-viscosity media can be dispensed with small flow rates. This type of valve offers a small internal volume of only 25 µl.

Valve coils

The valve coils are removable and available in different versions. They are optimised for very fast actuation times and minimal size.

Valve installation

Grid width with highest resolution, small size. Suitable to our adapter nozzles.

The coil unit must be ordered separately!

Product Selector

back